Dynasty V6-181 3.0L SOHC (1991)
Timing Belt: Tools and Equipment
RECOMMENDED TOOLS
-
Floor jack (for supporting the engine while removing the front engine mount).
-
Timing light (for measuring timing before and after).
-
Vacuum gauge (for measuring engine vacuum levels before and after).
Crankshaft Pulley Removal
-
Crankshaft Holding Tool MD998784 (used in conjunction with an old drive belt), or an air powered impact gun (for removing the crankshaft bolt).
Timing Belt Tensioner Release
-
Large flat blade screw driver (for moving timing belt tensioner).
-
Torque Wrenches:
-
Low Range (0-50 ft-lb) for covers and brackets.
-
High Range (0-150 ft-lb) for crankshaft pulley bolt.
-
Full set of Metric sockets and wrenches.
-
Fender covers.
