dodge Workshop Repair Guides

Dodge Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Alignment: Customer Interest
Rear Wheel Alignment - Uneven Tire Wear

 NO.: 02-07-90

GROUP:

SUSPENSION

DATE:

Nov. 5, 1990

SUBJECT:

Rear Tire Noise And Wear/Rear Wheel Aligriment

MODELS:

1989-1991 All Domestic FWD Vehicles (Excluding BB - Monaco)

SYMPTOM/CONDITION:

Rear camber and/or toe alignment causing uneven tire wear or excessive tread noise.

DIAGNOSIS:

If rear alignment is required, place vehicle on alignment rack and check alignrnent specifications. Two or four wheel alignment racks are acceptable,
following manufacturers instructions. Re-(2 wheel alignment rack) when recording rear toe-in (vehicle backed onto alignment rack) REMEMBER to
reverse sign convention; a total toein on direct reading charts is actually toe-out while driving. Maintain rear alignment within Chrysler Corporation
recommendations/specifications.

PARTS REQUIRED:

1 or 2 Shims

PN 5205114 (except AC, AY and AS Bodies)

1 or 2 Shims

PN 4626165 (all carlines)

Fig. 1-Shim Installation for Toe-Out

Fig. 2-Shim Installation for Toe-in

Steering and Suspension > Alignment > System Information > Technical Service Bulletins > Customer Interest for Alignment: > 020790 > Nov > 90 > Rear Wheel Alignment - Uneven Tire Wear

< PREV PAGE NEXT PAGE >