Grand Caravan V6-3.3L Flex Fuel (2008)
Keyless Entry Transmitter: Service and Repair
Standard Procedure - Battery Replacement
STANDARD PROCEDURE - BATTERY REPLACEMENT
1. With the transmitter buttons facing down, use a coin to pry the two halves of the transmitter apart. Make sure not to damage the rubber gasket
during separation of the housing halves.
2. Remove the battery from the transmitter back housing holder.
3. Replace the batteries. Avoid touching the new batteries with your fingers, Skin oils may cause battery deterioration. If you touch a battery, clean it
off with rubbing alcohol.
4. To assemble the transmitter case, snap the two halves together.
