Grand Caravan V6-3.3L Flex Fuel (2008)
3. Remove screw (3) securing parking brake cable routing bracket to axle.
4. Remove two bolts (2) securing disc brake caliper and adapter bracket (1) to axle.
5. Remove disc brake caliper and adapter bracket (1) from axle and rotor (4) as an assembly. Hang assembly out of way using wire or a bungee cord.
Use care not to overextend brake hose when doing this.
6. Remove any retaining clips, then slide brake rotor (2) off hub and bearing (1).
Front
FRONT
NOTE: Inspect disc brake pads before installation. See: Brake Pad/Service and Repair/Procedures/Brake Pads - Inspection
1. Clean the hub face (1) to remove any dirt or corrosion where the rotor mounts.
2. Install the brake rotor (2) over the studs on the hub and bearing.
