Grand Caravan V6-3.3L Flex Fuel (2008)
14. Remove the main bearing caps (1,2,3,5).
15. Remove the crankshaft (11) from engine block.
Crankshaft - Installation
INSTALLATION
1. Lubricate with engine oil and install the crankshaft main bearing halves in the engine block.
2. Position the crankshaft (11) in engine block.
3. Perform main bearing fitting procedureSee: Crankshaft Main Bearing/Service and Repair/Procedures.
4. Inspect main cap bolts for stretching (2). Replace bolts that are stretched.
NOTE: The main cap bolts should be examined before reuse. Bolt stretch can be checked by holding a scale or straight edge (2) against
the threads. If all the threads (3) do not contact the scale (2) the bolt must be replaced.