Grand Caravan V6-3.3L Flex Fuel (2008)
Engine Mount: Service and Repair
Engine Mount - Removal
Left Engine Mount
REMOVAL
1. Raise the vehicle on hoist.
2. Remove the left front wheel.
3. Remove the left mount thru bolt access cover.
4. Support the transaxle with a suitable jack.
5. Remove the engine front mount thru bolt to allow left mount removal clearance.
6. Remove the left mount thru frame rail bolt (2).
7. Lower transaxle for access to horizontal bolts.
8. Remove the horizontal bolts (2) from the mount (1) to the transaxle (3).
NOTE: To remove mount, additional lowering of transaxle may be required.
9. Remove left mount.
Right Engine Mount
REMOVAL
1. Remove air cleaner housing lid and clean air hose from throttle body.
2. Remove air cleaner element and housing.
3. Disconnect make-up air hose from cylinder head cover.
4. Remove the load on the right engine mount (1) by carefully supporting the engine assembly with a floor jack.
5. Disconnect electrical harness support clips from engine mount bracket.
6. Remove the bolts (2,3) attaching the engine mount (1) to the frame rail.
7. Remove the three bolts attaching the engine mount to the engine bracket (4).
8. Remove the right engine mount (1).
