Grand Caravan V6-3.3L Flex Fuel (2008)
Oil Pan: Removal and Replacement
Engine Oil Pan - Removal
REMOVAL
1. Disconnect negative cable from battery and remove engine oil dipstick.
2. Raise vehicle on hoist and drain engine oil.
3. Remove drive belt splash shield.
4. Remove transaxle case cover.
5. Remove oil pan fasteners.
6. Remove the oil pan (3) and gasket (1).
Engine Oil Pan - Installation
INSTALLATION
1. Clean sealing surfaces and apply a 1/8 inch bead of Mopar(R) Engine RTV GEN II at the parting line (1) of the chain case cover and the rear seal
retainer (1).