dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Blend Door Actuator - Removal|Page 8060 > < Blend Door Actuator - Removal
Page 2
background image

REMOVAL

1. Disconnect and isolate the negative battery cable.
2. Remove rear heater-A/C housing (1) and place it on a workbench.
3. Disconnect the wire harness connector (2) from the rear blend door actuator (3).
4. Remove the two screws (4) that secure the rear blend door actuator to the back of the rear heater-A/C housing and remove the actuator.

Blend Door Actuator - Removal|Page 8060 > < Blend Door Actuator - Removal