Grand Caravan V6-3.3L Flex Fuel (2008)
Blower Motor: Service and Repair
Installation - Front
INSTALLATION
NOTE: LHD model shown. RHD model similar.
1. Position the blower motor (3) into the front HVAC housing (4) and install the three retaining screws (2). Tighten the screws to 1.2 Nm (10 in.
lbs.).
2. Engage the wire harness (6) to the mounting bracket (5).
3. Connect the wire harness connector (1) to the blower motor.
4. If equipped, install the silencer underneath the passenger side of the instrument panel.
5. Reconnect the negative battery cable.
