Grand Caravan V6-3.3L Flex Fuel (2008)
Canister Purge Solenoid: Service and Repair
EVAP Purge Solenoid - Installation
INSTALLATION
1. Install the evaporator purge solenoid (5) and nut. Tighten to 10 Nm (90 in. lbs.).
2. Install the quick connect fuel tank hose (4) to evaporator purge solenoid (5).
3. Install the purge hose (2) to evaporator purge solenoid (5). Make sure the plastic clip for the purge hose (2) is connected.
4. Connect the electrical connector (1) to evaporator purge solenoid (5).
5. Install the air box cover.