Grand Caravan V6-3.3L Flex Fuel (2008)
Child Seat: Procedures
SYNCHRONIZING CABLE ADJUSTMENT
NOTE: Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child
seat open.
If the seat back hinges do not release at the same time the synchronizing cable must be adjusted.
1. Remove seat from vehicle.
2. Disengage the cable from the recline mechanism located on the seat back hinge (3) by pulling the cable end (1) toward the front of the seat.
3. Pull the U shaped locking tab (2) on the self-adjusting mechanism to disengage auto-adjust feature.
4. Reattach self-adjusting mechanism, pulling against spring load to tighten cable.
5. Press locking tab onto the adjusting mechanism to lock into place.
