Grand Caravan V6-3.3L Flex Fuel (2008)
1. Position the third row outboard seat belt and retractor unit (3) to the quarter inner panel (1) as a unit.
2. Engage the tab on the retractor bracket into the keyed slot in the quarter inner panel.
3. Install and tighten the screw (4) that secures the retractor bracket to the quarter inner panel. Tighten the screw to 39 Nm (29 ft. lbs.).
4. Engage the clips that secure the seat belt web guide (2) to the quarter inner panel. Be certain that the belt webbing is not twisted between the
retractor and the web guide.
5. Engage the tab on the seat belt turning loop bracket (2) into the keyed slot in the inner roof rail (1). Be certain that the belt webbing is not twisted
between the web guide and the turning loop.
6. Install and tighten the screw that secures the turning loop bracket to the inner roof rail. Tighten the screw to 39 Nm (29 ft. lbs.).
7. Push the turning loop bracket cover (3) up to the headliner.
8. Reinstall the quarter trim panel (5) to the quarter inner panel..
9. Reinstall the quarter trim bolster (2) to the quarter trim panel.See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Quarter Panel Trim/Quarter Trim Bolster/Installation.
10. Position the seat belt lower anchor (4) to the stud on the quarter inner panel. Be certain that the belt webbing (1) is not twisted between the turning
loop and the lower anchor.
11. Install and tighten the nut that secures the lower anchor to the stud on the quarter inner panel. Tighten the nut to 39 Nm (29 ft. lbs.).
12. Restore the third row seat to its seating position.