dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seat Belt Buckle - Removal|Page 9021 > < Seat Belt Buckle - Removal|Page 9019
Page 2
background image

SECOND ROW BUCKET SEAT - EXCEPT SWIVEL

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut,
frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or
retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the
anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or
ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler
Mopar(R) Parts Catalog.

1. Carefully pull the base of the inboard seat back hinge (1) away from the inboard side of the seat cushion frame (3) far enough to position the seat

belt buckle lower anchor (2) between the frame and the hinge.

2. Install and tighten the screws (4) that secure the hinge (2) to the seat cushion. Tighten the screws to 39 Nm (29 ft. lbs.).
3. Reinstall the hinge cover and the side shield to the inboard side of the seat.

Second Row Bucket Seat - Swivel

SECOND ROW BUCKET SEAT - SWIVEL

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut,
frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or
retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the
anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or
ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler
Mopar(R) Parts Catalog.

Seat Belt Buckle - Removal|Page 9021 > < Seat Belt Buckle - Removal|Page 9019