Grand Caravan V6-3.3L Flex Fuel (2008)
Keyless Start Antenna: Service and Repair
Installation
INSTALLATION
NOTE: Make sure the remote start antenna is positioned the same way noted during the removal procedure.
1. Install the remote start antenna module (2), and screws (1) to instrument panel assembly. Tighten to 2.5 Nm (22 in. lbs.).
2. Route the remote start coaxial cable in the position noted during the removal procedure.
3. Install the remote start antenna coaxial cable to mounting clips, if equipped.
4. Connect remote start antenna coaxial cable connector (2) to the wireless ignition node (WIN) (1).
5. Install instrument clusterSee: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair/Removal and
Replacement/Instrument Cluster - Installation.
6. Install the knee blocker. Refer toSee: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Knee
Blocker/Installation.
7. Install the instrument panel top cover. Refer toSee: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Cover - Installation.
8. Connect the negative battery cable, tighten the nut to 5 Nm (45 in. lbs.).