dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Transmission Mode Indicator - A/T > < Procedures|Page 5545
Page 1
background image

Transmission Cooler: Removal and Replacement

Removal

REMOVAL

1. Remove front grillSee: Body and Frame/Grille/Service and Repair/Grille - Removal.
2. Using tool 8875A, disconnect the transmission oil cooler line quick-connect fittings located on the driver side of the A/C condenser from the

transmission oil coolerSee: Procedures/Transmission Oil Cooler Lines.

3. Using Tool 8875A, disconnect transmission oil cooler line quick-disconnect fittings at the transaxleSee: Procedures/Transmission Oil Cooler

Lines.

Installation

INSTALLATION

1. Position transmission cooler lines in vehicle.
2. Install transmission cooler line at transaxle fittingsSee: Procedures/Transmission Oil Cooler Lines
3. Install transmission cooler lines at transmission oil cooler/condenserSee: Procedures/Transmission Oil Cooler Lines.
4. Install front grillSee: Body and Frame/Grille/Service and Repair/Grille - Installation.
5. Start engine and check transaxle fluid level. Adjust fluid level as necessary.

Transmission Mode Indicator - A/T > < Procedures|Page 5545