dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Radio, Stereo, and Compact Disc|Removal|Page 9960 > < Left Door Speaker|Page 9957
Page 1
background image

Speaker: Service and Repair
Removal

REMOVAL

D-PILLAR SPEAKER

Figure 1

1. Disconnect and isolate the battery negative cable.

2. Remove rear header trim (right side speaker).

3. Remove jack cover (left side speaker).

4. Remove liftgate scuff plate.

5. Remove upper seat belt bolt.

6. Partially remove quarter trim panel to access the D-pillar speaker.

7. Slide the speaker from the retainer.

8. Disconnect the wire harness connector from the speaker.

FRONT DOOR SPEAKER

Figure 2

1. Disconnect and isolate the battery negative cable.

2. Remove the front door trim panel.

3. Remove the speaker mounting screws.

4. Disconnect wire harness connector and remove speaker from door.

Radio, Stereo, and Compact Disc|Removal|Page 9960 > < Left Door Speaker|Page 9957