Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Front Bumper Cover / Fascia: Service and Repair
Removal
REMOVAL
1. Release hood latch and open hood.
2. Remove the headlamp assemblies.
3. Hoist vehicle and support with safety stands.
4. Remove the five push pin fasteners attaching bottom of fascia/air dam to radiator closure panel.
5. Remove front wheels.
6. Remove front wheelhouse splash shields fasteners as necessary to gain access to bolts attaching front fascia to fender. Refer to Front Fender Liner.
7. Remove the two bolts and two nuts attaching fascia to the front fenders (Figure 1) and (Figure 2).
8. Disconnect fog lamp wire connectors, if necessary.
9. Lower vehicle.
10. Remove two bolts attaching the upper grille support to the headlamp mounting panel at each side of the grille.
11. Remove bumper fascia from vehicle.
Figure 1 FRONT FASCIA