Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
![background image](/dodge/grand_caravan/v6-3.3l_vin_e_flex_fuel/Page-3042001.png)
Sliding Door Striker: Service and Repair
Sliding Door Rear Latch Striker
Removal
REMOVAL
1. Open sliding door.
2. Mark outline of striker on C-pillar door jamb face to aid installation.
3. Remove screws attaching striker to C-pillar (Figure 1).
4. Remove striker from vehicle.
Figure 1 SLIDING DOOR LATCH STRIKER
Installation
INSTALLATION
1. Place striker in position on vehicle.
2. Align striker to outline marks on C-pillar.
3. Install screws attaching striker to C-pillar. Tighten screws to 28 Nm (21 ft. lbs.) torque.
4. Verify sliding door alignment and operation.