Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Hood Latch Release Cable: Service and Repair
Removal
REMOVAL
1. Remove hood latch.
2. Disengage cable end from hood latch locking mechanism.
3. Slide cable case end sideways in keyhole slot of hood latch while pinching barb on cable case closed.
4. Remove cable from latch (Figure 2).
5. Remove hood release handle from instrument panel.
6. Disengage rubber grommet cable insulator from hole in dash panel.
7. Attach a suitable length of mechanic's wire to latch end of cable to assist cable installation.
8. Route cable back from latch through engine compartment toward dash panel near power brake booster (Figure 1).
9. Remove attaching clips from cable case.
10. From inside vehicle, pull cable through dash panel until mechanic's wire is exposed.
11. Disconnect cable from mechanic's wire.
12. Remove hood release cable from vehicle.
Figure 1 HOOD RELEASE CABLE ROUTING
