Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Trunk / Liftgate Motor: Description and Operation
Lift Gear And Link Rod
Description
DESCRIPTION
Figure 1 LIFTGATE GEAR/MOTOR ASSEMBLY
The lift gear and rod assembly are located in the left rear of the vehicle and are visible without removing the D-pillar trim(Figure 1). The lift gear
provides the leverage to move the liftgate from the closed to the open position. The lift gear attaches to a bearing on the gear motor assembly with four
bolts. On the outboard side of the lift gear are riveted on teeth, which mesh with the gear motor assembly drive gears during a open or close operation.
The rod assembly is a steel shaft, equipped with two spherical rod ends which attaches the lift gear to the liftgate. The lift gear and rod assembly are
serviceable components.
Operation
OPERATION
One end of the rod assembly is attached to the liftgate, the other attached to the lift gear. When the lift gear is driven by the gear motor assembly the
liftgate is moved to the open or closed position.
