Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
13. Remove high pressure hose from pump.
14. Allow power steering fluid to drain into pan.
15. Remove bolts attaching anti-lock brake sensor leads to cradle crossmember.
16. Position anti-lock brake leads out of the way.
17. Disconnect stabilizer bar links from ends of stabilizer bar.
18. Disconnect lower ball joints from lower steering knuckles.
19. Remove the rear engine mount heat shield (Figure 3).
20. Remove through bolt attaching rear engine mount to cradle crossmember (Figure 4).
21. Using paint or grease pencil, mark outline of cradle crossmember on frame rails to aid installation.
22. Support cradle crossmember on suitable lifting device (Figure 6).
23. Remove bolts attaching crossmember to front frame rails (Figure 5).
24. Remove cradle crossmember from vehicle (Figure 6).
Figure 2 STEERING COUPLING