Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Drink Holders: Service and Repair
Removal
REMOVAL
1. Remove the screw access cover from the bottom of the center bezel.
2. Remove the center bezel attaching screws.
3. Using a trim stick (special tool # C-4755) or equivalent, gently pry out on the edge of the instrument panel center bezel. Hang off to the side
leaving the accessory switches connected.
4. Pull the cup holder assembly rearward to disengage the rear guide studs from instrument panel (Figure 1).
5. Remove the cup holder assembly from lower instrument panel.
Figure 1 TRAY CUP HOLDER
