dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Trunk / Liftgate Lock Cylinder|Removal|Page 11123 > < Power Door Lock Switch|Removal|Page 11118
Page 1
background image

Trunk / Liftgate Lock Cylinder: Service and Repair
Removal

REMOVAL

1.   Remove the liftgate trim panel. Refer to Trim Panel. 

2.   Disconnect the electrical connector.

3.   Disconnect the latch rod.

4.   Rotate plastic lock cylinder nut one quarter turn and remove nut and spring washer.

5.   Remove the lock cylinder from the liftgate.

Trunk / Liftgate Lock Cylinder|Removal|Page 11123 > < Power Door Lock Switch|Removal|Page 11118