Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
Repair Procedure A: For Vehicles Built On or Before Sept. 16, 2004
1.
Remove the seat. Refer to the service information available on TechCONNECT, Section 23 Body, Seats, Seat, Removal, Seat - Third Row -
Fold-In-Floor.
2.
Place the seat assembly upside down in the folded seat back position on a clean bench surface.
3.
Remove the inboard front leg cover trim screw. The screw is located on the inboard side of the inboard leg cover near where the leg latches to the
floor.
4.
Rotate the front inboard leg down into the stow position by hand.
5.
Using a large screwdriver, remove the cover from the front leg by wedging the screwdriver between the top of the leg cover and the seat assembly
and prying down, applying a lifting force on the cover. (Fig. 1).
WARNING:
The seat leg is spring loaded. Be careful when you release the leg that is being held down with your hand.