dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Seat Cushion|Page 11605 > < Front Seat Cushion|Page 11603
Page 9
background image

5.   If equipped, disconnect wire connector from power seat switch (Figure 2).

Figure 1 FRONT SEAT SIDE SHIELD

Figure 2 POWER SEAT SWITCH WIRE CONNECTOR

Installation

INSTALLATION

WARNING: To avoid personal injury or death, on vehicles equipped with airbags, disable the supplemental restraint system before attempting
any steering wheel, steering column, airbag, occupant classification system, seat belt tensioner, impact sensor, or instrument panel component
diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the system capacitor to discharge

Front Seat Cushion|Page 11605 > < Front Seat Cushion|Page 11603