Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
1. Install the rear parking brake cable in the brake support plate. Insert cable housing retainer into brake support plate making certain that cable
housing retainer fingers lock the housing and retainer firmly into place.
2. Attach the parking brake cable onto the park brake actuator lever.
3. Install the brake shoes on the rear brake support plate.
4. Insert cable housing retainer into body outrigger bracket making certain that cable housing retainer fingers lock the housing firmly into place.
5. Connect rear parking brake cable to the equalizer bracket (Figure 1).
6. Install brake drum, and wheel and tire assembly.
7. Remove the locking pliers from the front park brake cable. This will automatically adjust the park brake cables.
8. Apply and release park brake pedal 1 time. This will seat the park brake cables.
Figure 1 Parking Brake Cables At Equalizer
Removal - Fold-In-Floor Seating
REMOVAL - FOLD-IN-FLOOR SEATING
1. Release the parking brake.
2. Raise and support the vehicle.
3. Manually release the automatic self-adjusting mechanism tension of the parking brake lever (pedal) assembly.
4. Remove the equalizer (Figure 1).