Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Figure 2 OIL PAN
Installation
INSTALLATION
1. Clean sealing surfaces and apply a 1/8 inch bead of Mopar(R) Engine RTV GEN II at the parting line of the chain case cover and the rear seal
retainer (Figure 1).
Figure 1 Oil Pan Sealing
1 - SEALER LOCATIONS
2. Position a new pan gasket on oil pan (Figure 3).
3. Install oil pan and tighten fasteners to 12 Nm (105 in. lbs.) (Figure 3).
4. Install cover to transaxle case (Figure 2).
5. Install the strut bolt to transaxle housing (Figure 2). Tighten all bending brace bolts.