Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Front Crankshaft Seal: Service and Repair
Installation
INSTALLATION
1. Position Special Tool C-4992-2 Guide, on the crankshaft nose (Figure 1).
2. Position new seal over the guide with the seal spring in the direction of the engine front cover (Figure 1).
3. Install seal using Special Tool C-4992-1 until seal is flush with cover. (Figure 1).
Figure 1 CRANKSHAFT FRONT SEAL INSTALLATION
4. Install crankshaft damper.
5. Install accessory drive belt.
6. Install inner splash shield and right front wheel.
7. Lower vehicle and connect negative cable to battery.
