Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Control Assembly: Service and Repair
Installation - Front
INSTALLATION
1. Position the A/C-heater control into the instrument panel center bezel.
2. Install the six screws that secure the A/C-heater control to the instrument panel center bezel. Tighten the screws to 2 Nm (17 in.lbs.).
3. If the vehicle is equipped with the ATC heating-A/C system, connect the infrared sensor connector to A/C-heater control.
4. Install the center bezel onto the instrument panel.
5. Reconnect the negative battery cable and calibrate the A/C-heater control.
