Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
1. Push belt through seat cushion.
2. While looking at the bottom of the seat, locate retaining bolt hole on the left side of the seat riser. Install retaining bolt into seat riser (Figure 1).
Torque anchor bolt to 39 Nm (29 ft.lbs.).
3. Place seat into track and on front anchors.
4. Pull #3 strap and install seat onto latching area.
5. Pull seat assembly down firmly and snap into track.
6. Pull handle #1 and fold seat back rearward.
7. Close rear liftgate.
Figure 1 SEAT BELT BUCKLE - SECOND ROW INBOARD - 50/50 BENCH