dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Tie Rod End|Removal|Page 8079 > < Tie Rod End|Removal|Page 8077
Page 4
background image

Figure 6 Travel Restrictor

9.   Install appropriate inner tie rod removal tool.

CAUTION: Place an appropriate size wrench on the exposed section of the rack gear while loosening the inner tie rod to resist rotation
and prevent damage to the gear mechanism. Do not use a tool that could damage the rack gear.

CAUTION: If inner tie rod cannot be removed using specified tools, do not use a hammer or heat to loosen. Damage to steering gear will
occur. Replace entire steering gear.

10.   While holding rack gear stationary using an appropriate size wrench placed on exposed section of rack gear, unthread and remove inner tie rod.

Tie Rod End|Removal|Page 8079 > < Tie Rod End|Removal|Page 8077