Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
spring hanger to the torque specification listed below. This sequence must be followed to properly seat the bushings into the springs and to avoid
bending the spring hanger.
8. Tighten the spring front pivot bolt to 156 Nm (115 ft. lbs.) torque.
9. Tighten rear spring shackle pin nuts to 61 Nm (45 ft. lbs.) torque.
10. Tighten the lower shock absorber mounting bolt to 102 Nm (75 ft. lbs.) torque.
Figure 1 Lifting Point And Spring Mount
Figure 2 Axle Plate Bolts
