Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Clutch Release Bearing: Service and Repair
Installation
INSTALLATION
1. If removed, install new release lever pivot ball(s) using slide hammer C-3752 and remover/installer 6891 (Figure 1) (Figure 2).
Figure 1 Pivot Ball Removal/Installation
Figure 2 Pivot Ball Position
1 - PIVOT BALL (1)
2. Install clutch release bearing to lever. Apply grease to interface points. Make sure release bearing retainers engage lever pocket as shown in
(Figure 3).
