Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Figure 2 End Cover Removal
3. Clean and inspect sealer surfaces.
Installation
INSTALLATION
1. Reinstall cover and tighten bolts to 28 Nm (250 in. lbs.) in the sequence shown in (Figure 1). Retighten first bolt after all others are tight.
CAUTION: When end cover is installed be careful not to damage the P.T.U. Input Shaft Cover Seal.
Figure 1 Bolt Tightening Sequence
2. Reinstall P.T.U. into vehicle.
3. Check and fill fluids as required.