Grand Caravan V6-3.3L VIN R (2005)
g.
Record the "Software part # " on the repair order for later reference.
h.
Check DTC's
2.
If the Symptom/Condition is present, use the following table to determine the appropriate action.
SPECIAL TOOLS/EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
NOTE:
Whenever a module is reprogrammed, the software in the DRBIII(R); must be programmed with the latest revision level available.
NOTE:
If this flash process is interrupted/aborted, the flash process should be restarted and then follow the directions on the DRBIII(R).
1.
Before beginning the flash procedure, remove any old flash files from the DRBIII(R) memory. To clear the memory from the MAIN MENU:
a.
Simultaneously press the "MORE" and "YES" keys.
b.
A screen will appear requesting a "COLD BOOT".
c.
Follow the on screen instructions by selecting the "F4" key.
d.
When the DRBIII(R) reboots to the MAIN MENU, proceed to Step # 2.
2.
Connect the DRBIII(R) to TechCONNECT. Open TechTOOLS and verify that the "DRBIII(R) Status: Connected" message is in the upper right
corner of the TechTOOLS screen.
3.
Enter the "BCM part # ", recorded in "Diagnosis Step # 1, in the "Parts Criteria" area and select "Show Updates". TechTOOLS will populate the
appropriate flash file.
4.
Select the flash file.
