Grand Caravan V6-3.3L VIN R (2005)
4. Remove the CAB from the HCU (Fig. 31).
ASSEMBLY - ICU
1. Install the CAB (Fig. 31) on the HCU.
2. Install the 4 bolts mounting the CAB (Fig. 30) to the HCU. Tighten the CAB mounting bolts to a torque of 2 Nm (17 inch lbs.).
3. Plug the pump/motor wiring harness into the CAB.
4. Install the ICU in the vehicle and bleed the base and ABS hydraulic systems.
MK25E
INTEGRATED CONTROL UNIT (ICU) - MK25E
DISASSEMBLY
1. If not equipped with traction control, remove the three screws attaching the ABM to the HCU (Fig. 39).