Grand Caravan V6-3.3L VIN R (2005)
4. Install piston into caliper bore pushing it past the piston seal until it bottoms in the caliper bore (Fig. 34).
5. Position the dust boot into the counterbore of the caliper assembly piston bore.
6. Using a hammer and Installer, Special Tool C-4689 or C-4842 (depending on piston size), and Handle, Special Tool C-4171, drive the boot into
the counterbore of the caliper as necessary (Fig. 35).
7. Reinstall the caliper on the vehicle and bleed the brakes as necessary.
INSTALLATION
INSTALLATION - FRONT DISC BRAKE CALIPER (CONTINENTAL TEVES BRAKES)
CAUTION: TRW and Continental Teves brake calipers are not interchangeable. Each caliper is specifically designed for the unique brake system. If
calipers are interchanged, improper performance, noise and increased stopping distance can occur.
1. Completely retract the caliper piston back into piston bore of the caliper. Use a C-clamp to retract the piston if necessary. Place a wood block over
the piston before installing the C-clamp to avoid damaging the piston.