Grand Caravan V6-3.3L VIN R (2005)
27. Remove the hold down spring and pin (Fig. 148) from the trailing park brake shoe.
28. Remove the trailing park brake shoe from the adapter.
29. Remove the park brake shoe actuator from the adapter and inspect for signs of abnormal wear and binding at the pivot point.
INSTALLATION
1. Install park brake shoe actuator into adapter.
2. Install the trailing brake shoe on the adapter.
NOTE: When the hold down pin is installed, the long part of the hold down pin is to be positioned strait up and down. This will ensure that the
hold down pin is correctly engaged with the adapter.
3. Install the hold down spring and pin (Fig. 148) on the trailing park brake shoe.
4. Install the upper return springs (Fig. 147) on the trailing park brake shoe.
5. Install the upper return springs on the leading park brake shoe (Fig. 146). Then position the top of the leading park brake shoe at the upper anchor
and rotate the bottom of the shoe outward until correctly installed on the adapter.
6. Install the adjuster (Fig. 145) between the leading and trailing park brake shoe.
NOTE: When the hold down pin is installed, the long part of the hold down pin is to be positioned strait up and down. This will ensure that the
hold down pin is correctly engaged with the adapter.
7. Install the hold down spring and pin (Fig. 144) on the leading park brake shoe.
8. Install the lower return spring (Fig. 143) on the leading and trailing park brake shoes. When installing the return spring, it is to be installed behind
the park brake shoes (Fig. 143).
9. Install the 4 mounting bolts for the adapter and hub/bearing into the bolt holes in the axle.
