dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Center Bezel Outlets|Page 7223 > < Center Bezel Outlets|Page 7221
Page 3
background image

1. Remove the trim panels from the inner right quarter panel and the right D-pillar.

Rear Distribution Duct

2. Slide the rear distribution duct upwards and disengage it from the outlet located at the top of the rear HVAC housing.
3. While pulling the lower end of the rear distribution duct away from the rear HVAC housing, disengage the upper end of the distribution duct from

the headliner duct and remove the duct.

INSTALLATION

1. Position the upper end of the rear distribution duct to the headliner duct.
2. Install the upper end of the rear distribution duct onto the headliner duct and align the lower end of the duct with the outlet at the top of the rear

HVAC housing.

3. Slide the rear distribution duct downward and engage it onto the outlet located at the top of the rear HVAC housing.
4. Install the trim panels onto the inner right quarter panel and the right D-pillar.

Floor Distribution Ducts

REMOVAL

1. Roll back the carpet on the front floor from under the instrument panel toward the rear of the vehicle.

Floor Distribution Ducts - LHD Shown, RHD Typical

2. Lift the center floor distribution duct upward far enough to disengage its locator hole from the weld stud on the front floor panel.
3. Pull the center floor distribution duct rearward and disengage it from the floor outlet of the front HVAC housing.
4. Disassemble the right and/or left floor distribution ducts from the center floor distribution duct as required.

Center Bezel Outlets|Page 7223 > < Center Bezel Outlets|Page 7221