dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Heater Hose|Front|Page 7483 > < Campaign - Underbody Heater Hose Replacement|Page 7480
Page 1
background image

Heater Hose: Service and Repair
Front

Heater Inlet Hose

REMOVAL

WARNING:  REFER TO THE APPLICABLE WARNINGS AND CAUTIONS FOR THIS SYSTEM BEFORE PERFORMING THE
FOLLOWING OPERATION. FAILURE TO FOLLOW THE WARNINGS AND CAUTIONS COULD RESULT IN POSSIBLE PERSONAL
INJURY OR DEATH.

NOTE:  The heater inlet hose is constructed from formed steel tubing and rubber hoses. Depending on application, the ends are secured to the heater
core, engine oil cooler or the engine by spring tension clamps.

1. Drain the engine cooling system.

Heater Inlet Hose - 2.4L Shown, 2.5L Typical

Heater Hose|Front|Page 7483 > < Campaign - Underbody Heater Hose Replacement|Page 7480