dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Compass Calibration|Page 10015 > < Compass Calibration|Page 10013
Page 1
background image

Compass: Service and Repair
Compass/Mini-Trip Computer

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove overhead console.

3. Remove the screws holding Compass Mini-Trip Computer (CMTC) module in the overhead console.
4. Remove CMTC module from the console assembly.

INSTALLATION

1. Position the compass mini-trip computer (CMTC) module in the overhead console.
2. Install the ten screws holding the CMTC module in the overhead console.
3. Install the overhead console.
4. Connect the battery negative cable.

NOTE:  If a new CMTC module has been installed, the compass will have to be calibrated and the variance set.

Compass Calibration|Page 10015 > < Compass Calibration|Page 10013