dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/C Discharge Line|Page 1686 > < Plumbing|Page 1683
Page 1
background image

Hose/Line HVAC: Service and Repair
A/C Discharge Line

REMOVAL

WARNING:  REFER TO THE APPLICABLE WARNINGS AND CAUTIONS FOR THIS SYSTEM BEFORE PERFORMING THE
FOLLOWING OPERATION. FAILURE TO FOLLOW THE WARNINGS AND CAUTIONS COULD RESULT IN POSSIBLE PERSONAL
INJURY OR DEATH.

1. Recover the refrigerant from the refrigerant system.
2. Remove the right headlamp unit.

A/C Discharge Line To A/C Condenser - Typical

3. Remove the nut that secures the A/C discharge line to the right end of the A/C condenser.
4. Disconnect the A/C discharge line from the A/C condenser and remove and discard the O-ring seal and gasket.
5. Install plugs in, or tape over the opened discharge line fitting and the condenser inlet port.
6. Raise and support the vehicle.
7. On models equipped with the 2.5L and 2.8L diesel engines, remove the belly pan from underneath the engine compartment.

A/C Discharge Line To Compressor - Typical

A/C Discharge Line|Page 1686 > < Plumbing|Page 1683