Grand Caravan V6-3.3L VIN R (2005)
Keyless Entry Module: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the Steering Column Opening Cover.
3. Remove the steering column upper and lower shrouds.
4. Disengage the steering column wire harness from the Sentry Key Remote Entry Module (SKREEM).
5. Remove the one screws securing the SKREEM to the steering column.
6. Rotate the SKREEM upwards and then to the side away from the steering column to slide the SKREEM antenna ring from around the ignition
switch lock cylinder housing.
7. Remove the SKREEM from the vehicle.
INSTALLATION
1. Slip the Sentry Key Remote Entry Module (SKREEM) antenna ring around the ignition switch lock cylinder housing. Rotate the SKREEM
downwards and then towards the steering column.
2. Install the one screws securing the SKREEM to the steering column.
3. Connect the steering column wire harness to the SKREEM.
4. Install the steering column upper and lower shrouds.
5. Install the Steering Column Opening Cover.
6. Connect the battery negative cable.
