Grand Caravan V6-3.3L VIN R (2005)
Parking Assist Control Module: Service and Repair
REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Remove the left quarter trim panel.
Park Assist Module Electrical Connector
4. Disconnect the Park Assist Module electrical connector.
Park Assist Module Location
5. Remove the two attaching screws and separate the module from vehicle.
INSTALLATION
1. Position the Park Assist Module and install the two attaching screws. Torque screws to 3.5 Nm (30 in. IDS.).
2. Connect the Park Assist Module electrical connector.
3. Install the left quarter trim panel.
4. Connect the battery negative cable.