dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Voltage Regulator > < Alternator Pulley|Description and Operation|Page 6309
Page 2
background image

Special Tool 8433 And Decoupler

9. Use Special Tool #8433 to loosen the Generator Decoupler.

10. Remove the tool.
11. Remove the Generator Decoupler.

INSTALLATION

1. Install the Generator Decoupler to the generator shaft.

Decoupler Installation

2. Use Special Tool #8433 to tighten the Generator Decoupler. Refer to the torque chart for the proper torque.
3. Install a new decoupler pulley cover.
4. Install the Air Box.
5. Raise vehicle and support.
6. Install accessory drive belt.
7. Install the right front lower splash shield.
8. Lower vehicle.
9. Connect battery negative cable.

Voltage Regulator > < Alternator Pulley|Description and Operation|Page 6309