dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Lower Steering Column Cover|Page 6857 > < Air Bag System - Passenger Air Bag Deactivation|Page 6852
Page 1
background image

Steering Column Cover: Service and Repair
Lower Steering Column Cover

REMOVAL

Steering Column Cover And End Cap

1. Use trim stick to gently pry rt edge of steering column cover from lower rt panel just enough to disengage 'belt loops'.
2. Pull lower steering column cover rearward to release spring clips and remove from the vehicle.
3. Remove the three screws attaching the end cap to instrument panel.
4. Pull end cap outward to release spring clips and remove from the vehicle

INSTALLATION

1. Place the end cap into position and push spring clips into position.
2. Attach left side of lower steering column cover first. Align locating ribs into left end cap and rock cover to right side and align belt loops into

position into instrument lower right panel.

3. Place the lower steering column cover into position and push spring clips into position.
4. Install the two screws attaching the lower steering column cover to instrument panel.

Lower Steering Column Cover|Page 6857 > < Air Bag System - Passenger Air Bag Deactivation|Page 6852