Grand Caravan V6-3.3L VIN R (2005)
![background image](/dodge/grand_caravan/v6-3.3l_vin_r/Page-1903002.png)
10. On both sides of vehicle, remove nut attaching outer tie rod end to steering knuckle (Fig. 4). Remove nut by holding tie rod end stud with a socket
while loosening and removing nut with wrench.
11. Remove both tie rod ends from steering knuckles using Puller, Special Tool C-3894-A (Fig. 5).
12. Remove the lower control arm rear bushing retainer bolts located on each side of each lower control arm rear bushing.
NOTE: The bolts fastening the cradle crossmember reinforcement are of two different thread sizes. Note the location of the various sizes.