dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Tire Monitoring System > < Instrument Cluster / Carrier|Locations|Page 570
Page 1
background image

Oil Change Reminder Lamp: Service and Repair

OIL CHANGE INDICATOR - RESET

Your vehicle is equipped with an engine oil change indicator system. The "Oil Change Required" message will flash in the EVIC display for
approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is
duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.

Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily,
press and release the Menu button. To reset the oil change indicator system (after performing the scheduled maintenance) perform the following
procedure:

1. Turn the ignition switch to the "ON" position (Do not start the engine). 
2. Fully depress the accelerator pedal slowly three times within 10 seconds. 
3. Turn the ignition switch to the "LOCK" position.

NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this
procedure.

Tire Monitoring System > < Instrument Cluster / Carrier|Locations|Page 570