Grand Caravan V6-3.6L (2011)
Engine Control Module: All Technical Service Bulletins
Engine Controls - MIL ON/DTC's P06DD/P0522/P0108/P1239
GROUP: Vehicle Performance
DATE: March 29, 2011
HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING "HELP" THEN "HELP
CONTENTS" AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW.
THE wiTECH SOFTWARE LEVEL MUST BE AT RELEASE 11.03 OR HIGHER TO PERFORM THIS PROCEDURE.
Flash: MIL Illumination For Any PO6DD, P0522, P0108, P1239
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.
Caravan/Town and Country
This bulletin applies to RT vehicle equipped with a 3.6L engine (sales code ERB) built before March 12, 2011 (MDH 0312XX).
This bulletin applies to LC/LD/LX vehicle equipped with a 3.6L engine (sales code ERB) built before March 26, 2011 (MDH 0326XX).
This bulletin applies to JC vehicle equipped with a 3.6L engine (sales code ERB) built before March 23, 2011 (MDH 0323XX).
This bulletin applies to JS vehicle equipped with a 3.6L engine (sales code ERB) built before March 17, 2011 (MDH 0316XX).
The customer may experience a MIL illumination. Upon further investigation the Technician may find that any of the following Diagnostic Trouble
Codes have been set.
P06DD - Engine Oil Pressure Control Circuit Stuck Off
P0522 - Engine Oil Pressure Sensor Circuit Low
P0108 - Manifold Absolute Pressure Sensor Circuit High
P1239 - Engine Oil Temperature Too Low
Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DTC's other then the ones listed above are present record them on the repair order and repair as necessary before proceeding further with