Grand Caravan V6-3.8L (2009)
lower hinge.
8. Remove the screw (2) that secures the side impact sensor to the lower sliding door channel panel.
9. Disconnect the body wire harness connector (4) from the side impact sensor (3) on the top of the lower sliding door channel panel.
10. Pull the side impact sensor straight up from the mounting location to unsnap the anti-rotation pin on the base of the sensor from the clearance hole
in the lower sliding door channel panel.
11. Remove the side impact sensor from the vehicle.
12. Using door trim panel tool C-4829A or equivalent, remove the wire harness routing clips located under the drive assembly (3).
13. Pull the harness (4) out of the body channel and set aside.
